| |
3500 Tvisto - 3.5" Multimedia Divx Player
Win98se/ME/2000/XP/Vista & Mac O.S Drivers Download:
3500 Tvisto Manual: English.pdf
Latest Firmware update: V2.0.10.62 Apr. 2007 posted
Old Version Firmware update: V2.0.10.57, V2.0.10.41, V1.4.10.29
For more Tvisto FAQ Articles
Updates and Changes made in this new release:
Added:
- Option to temporarily turn off all on-screen messages
(press HOME button to go to main screen, then press following buttons: 0 Info 0 to turn it off and either reboot or press 1 Info 1 to turn it back on
Changed:
- Removed "loading image" message during slideshow
- If the Pause button is pressed during a slideshow, the OSD message will now disappear after 2 seconds
- Updated Hungarian menu language
- Hard disk will now go into sleep mode instead of standby when power off button on remote control is pressed
- Added delay for remote control scancode when in power off mode
- When browsing the file library, scrolling upwards to the last page is now possible
Fixed:
- Music did not stop when slideshow was finished
- If a music folder for background music was selected, it got reset after power off via remote control
- Multiple songs were highlighted when the previous track button was pressed during music playback
- Pressing previous/next button during music playback did not go to last/first song at the end/beginning of the list
Before you upgrade the firmware, connect your TVisto to your TV set, navigate to 'Settings' and select 'Firmware'. Press ENTER on your remote control and check the current firmware version, which can be seen on the right side of the screen. If your current version is the same as the latest release seen above, your unit does not need to be updated. If yours has an older version, follow the steps described below.1. Download the latest firmware v2.0.x.41 for your 'TVisto v2.0.10.62'. This firmware upgrade is ONLY for GMG INC's 3500 Tvisto. 2. Connect the unit to your computer and extract the ZIP files to your external HDD. Save the 3 files in the folder 'Firmware' and choose YES, if asked to overwrite any existing files! It's recommend to delete any previous firmware prior to saving the new version and empty the recycle bin!3. Disconnect your unit using the safe removal process and connect it to your TV set.4. IMPORTANT NOTE: NEVER TURN OFF YOUR UNIT DURING THE FIRMWARE UPDATE PROCEDURE. THIS MAY DAMAGE YOUR DEVICE. IF FOR ANY REASONS (E.G. POWER SUPPLY FAILURE DURING FIRMWARE UPDATE) THE PROCEDURE FAILS, YOU MAY NOT BE ABLE TO OPERATE YOUR DEVICE ANYMORE. IN THIS CASE PLEASE CONTACT US!5. Navigate to 'Settings' and select 'Firmware Update'6. Press ENTER on your remote control to start the upgrade process. You can verify the current and latest version from the menu on the right side. As mentioned earlier, only upgrade the firmware if your present version is older then the one provided on this website!7. To verify the process, press ENTER to confirm and start the upgrade.8. The update warning can now be seen and a progress bar will appear after about 10 seconds. DO NOT TURN OFF YOUR UNIT, AND PAY ATTENTION TO THE COMMAND ON YOUR TV SCREEN!9. The firmware upgrade will take approximately 1 minute and once completed, the following message will appear: "Update Successfull. Power OFF Device."10. Turn off your device by removing the power supply, wait a few seconds, then connect the power supply again. The new firmware is now updated and operating, and your device will show up on the TV screen after about 2-5 seconds.
|
